angle cutting tool
英 [ˈæŋɡl ˈkʌtɪŋ tuːl]
美 [ˈæŋɡl ˈkʌtɪŋ tuːl]
倒角铣刀
双语例句
- This article is to introduce the new way of converting the cutting tool's working angle in the feed profile or penetration of a cutting tool profile to the principal profile-use tools cross-sections angle conversion formulate to calculate the tool's work angle.
本文介绍了将刀具进给剖面或切深剖面内的工作角度换算至主剖面内的新方法&用刀具各剖面角度换算公式计算。 - Investigation on velocity relief angle and critical oblique angle of the self-propelled rotary cutting tool
自回转刀具速度方向后角和临界倾斜角的研究 - As a result of high frequency vibration, the chips are easier to break up, and the cutting shear angle increases, which lead to cutting force decrease. The cutting tool surface contacts periodically with chip, which lead cutting temperature to decrease.
工件在超声波激励作用下高频振动，切屑容易断裂，切削剪切角的增大降低了切削力，工件与刀具的周期性分离降低了切削温度。 - Higher the rake angle, better is the cutting and less are the cutting forces, increasing the rake angle reduces the metal backup available at the tool rake face.
前角越大，则切削越好且切削力越小，增加前角可以减少刀具前倾面上产生的金属阻塞。 - Overall measuring and selecting the angle of cutting tool
全方位测量与优化选择刀具角度 - By changing the tool rake angle, the cutting force and the variation of effective stress on tool flank under different rake angle were obtained.
改变刀具前角，得出在不同的刀具前角下T（iC，N）基金属陶瓷刀具在正交切削过程中切削力以及刀具后刀面等效应力变化； - Five-axis NC machine tool with small pendulum angle table can not carry out continuous cutting of the part of centrifugal turbine because of the structure of machine tool.
由于工作台摆动角度受机床结构的限制，小摆角五坐标数控机床不能直接进行离心叶轮的连续加工。 - Methods for chatter suppression are surveyed, then a new one proposed for on-line varying the rake and clearance angle of the cutting tool, and the principle of chatter suppression analyzed.
首先评述了目前对机床颤振的各种控制方法，然后提出在线变刀具前、后角抑制颤振的方法，并讨论了这种新方法的抑振原理。 - The theoretical calculation of shear angle in the case of cutting tool having negative primary land
切削刀具刃口带有负倒棱时剪切角的理论计算 - The paper systematically analyzes the factors that affect the working angle of metal cutting tool from the basic definition of designing angle and working angle, which has given the way to choose the geometrical angle of cutting tool.
从刀具标注角度与工作角度的概念出发，较系统地分析影响金属切削刀具实际几何角度的主要因素，提出合理选择刀具几何角度的方法。